Back to Blog
Tips & Care 2026-11-17 OneSkin 0 views

OS-01 HAIR Dermaroller Care: Cleaning and Replacement Tips

OS-01 HAIR Dermaroller Care: Cleaning and Replacement Tips

A practical guide to keeping the OS-01 HAIR Dermaroller clean, knowing when to replace it, and building scalp microneedling hygiene into your routine.

Start with what the tool is made of

The OS-01 HAIR Dermaroller is a scalp tool with 540 microneedles made from 100% medical grade stainless steel, each 0.25mm long. The handle is 100% recyclable plastic. Because the needles are the part that touches your scalp, care and hygiene should focus there.

The catalog describes the dermaroller as creating gentle micro-channels in the scalp to boost absorption of OS-01 HAIR. That intended use is the reason hygiene matters: anything that contacts the needles should be clean before and after each use.

What the product record confirms

  • OS-01 HAIR Dermaroller: 540 microneedles, 0.25mm, 100% medical grade stainless steel Knowing the needle count and material helps you inspect the head for bent or dulled needles and choose cleaning methods that suit stainless steel.
    OS-01 HAIR Dermaroller
    OS-01 HAIR Dermaroller
  • OS-01 HAIR Dermaroller: 100% recyclable plastic handle The plastic body is not the delicate part; the needles are. Keep cleaning focused on the needle head and avoid soaking the whole tool unnecessarily.

How to clean a scalp dermaroller between uses

The supplied product record does not include a manufacturer cleaning protocol, so the steps below are general hygiene practices for a stainless-steel microneedling tool. Always follow any instructions that come with your device if they differ.

  1. Inspect the needle head first: Look for bent, dull, or discolored needles before cleaning. If the head looks damaged, do not use it on your scalp.
  2. Rinse with clean water: Remove any visible residue from the needles with a gentle rinse. Avoid scrubbing the needle head, which can bend the fine 0.25mm needles.
  3. Disinfect the needles: Use a suitable disinfecting solution for stainless steel, following its label directions. Do not invent a soaking time; if the solution label does not specify one for this type of tool, choose a product that does.
  4. Air-dry completely: Let the dermaroller dry fully before storing it. A dry needle head is less likely to harbor moisture between uses.
  5. Store it covered and upright: Keep the dermaroller in a clean, dry place where the needles will not be crushed or contaminated by dust or other products.

Scalp microneedling hygiene tips before and after use

Clean needles are only part of the routine. Wash your hands before handling the dermaroller, and start with a scalp that is free of heavy styling products, oils, or residue. If you use OS-01 HAIR, apply it according to its own directions after dermarolling, not before, so the needles are not pushing product residue into the scalp.

After use, clean the dermaroller before you put it away. Leaving serum or scalp residue on the needles makes the next cleaning harder and gives bacteria a place to settle. Do not share your dermaroller with anyone else.

When to replace your OS-01 HAIR Dermaroller

The supplied product information does not state a fixed replacement schedule, so there is no official interval to quote. Use condition-based checkpoints instead, and replace the tool if any of these apply.

  • Bent or dull needles: If the 540 microneedles look bent, flattened, or no longer feel uniform, replace the dermaroller. Dull needles are more likely to drag on the scalp.
  • Discoloration or residue that will not clean off: Stainless steel is durable, but persistent discoloration or residue after cleaning is a sign to stop using that head.
  • You cannot remember when you last cleaned it: If the tool has been stored dirty or used without cleaning, replacing it is the safer choice.
  • It has been dropped or damaged: A fall can bend fine needles even if the handle looks fine. Inspect the head after any drop.

What the supplied information does not cover

The product record does not include a manufacturer cleaning protocol, a recommended disinfection product, a drying time, or a replacement interval. It also does not confirm whether the dermaroller is waterproof beyond the stated materials. For any of those details, check the packaging or contact OneSkin directly rather than guessing. The care steps above are general hygiene guidance for a stainless-steel scalp tool, not a substitute for manufacturer instructions.

Related Articles

Customer Service
Home
Products
Cart
Profile